AGFA ANAPURNA MV, Technical Manual

Page: 74 / 215

74
DESCRIPTION OF CALIBRATION MENU
DESCRIPTION OF CALIBRATION MENU
-
-
14
14
Operation of each function key
UP Key ,DOWN Key : Value Change
ENTER Key : Terminate after saving
ESC Key : Terminate without saving .
F2> PRINT : Print feeding pattern set in current feeding
value.
F5> CLEAR : Initialize all the data. (set to 0 for all the data)
* The range of setting value is -20 upto 20.
If set value is increased, the image will be wider to the right.
If set value is decrease, the image will be wider to the left.
If setting horizontal alignment value correctly,
can get the print in a good quality.
OFF
1
== HORIZONTAL CALIBRATION ==
F2> PRINT CLEAR <F5
K1=0 C1=-1 M1=-3 Y1=-6 LC1=-8 LM1=-5
K2=0 C2=-1 M2=-3 Y2=-6 LC2=-8 LM2=-5
2