AGFA 5420/100, User Manual

Page: 42 / 188

DX-D 400
User Manual
32
0232F EN
20191213
GUIDANCE AND MANUFACTURER’S DECLARATION -- ELECTROMAGNETIC IMMUNITY
(IEC 60601-1-2:2007)
The DX--D400 radiographic room is intended for use in the electromagnetic environment specified below.
The customer or the user of The DX--D400 radiographic room should assure that it is used in such an environment.
Immunity test
IEC 60601-1-2:2007
Test level
Compliance
level
Electromagnetic environment -- guidance
Electrostatic discharge (ESD)
IEC 61000-4-2
¦
6 kV contact
¦
8 kV air
¦
6 kV
¦
8 kV
Floors should be wood, concrete or ceramic
tile. If floors are covered with synthetic material,
the relative humidity should be at least 30%.
Electrical fast transient/burst
IEC 61000-4-4 (*)
¦
2 kV for power supply lines
¦
1 kV for input/output lines
¦
2 kV
N/A
Mains power quality should be that of a typical
commercial or hospital environment.
Surge
IEC 61000--4--5 (**)
¦
1 kV line(s) to line(s)
¦
2 kV line(s) to earth
¦
1 kV
¦
2 kV
Mains power quality should be that of a typical
commercial or hospital environment.
Voltage dips, short
interruptions and voltage
variations on power supply
input lines.
IEC 61000--4--11
40% U
T
(60% dip in U
T
)
for 5 cycles
70% U
T
(30% dip in U
T
)
for 25 cycles
< 5% U
T
(>95% dip in U
T
)
for 250 cycles
< 5% U
T
(>95% dip in U
T
)
for 0.5 cycle
< 5% U
T
(>95% dip in U
T
)
for 1 cycle
60%
for 5 periods
30%
for 25 periods
>95%
for 250 periods
>95%
for 0.5 periods
>95%
for 1 period
Mains power quality should be that of a typical
commercial or hospital environment. If the user
of the Radiographic Room requires continued
operation during power mains interruptions, it is
recommended that the Radiographic Room be
powered from an uninterruptible power supply
or a battery.
Power frequency (50 Hz)
magnetic field
IEC 61000--4--8
3 A/m 3 A/m
Power frequency magnetic fields should be at
levels characteristic of a typical location in a
typical commercial or hospital environment.
NOTE -- U
T
is the a.c. mains voltage prior to application of the test level.