AGFA 5420/100, User Manual

Page: 136 / 188

DX-D 400
User Manual
126
0232F EN
20191213
6.1.4 RADIOGRAPHIC PARAMETERS
kV DISPLAY can show:

The radiographic kV value selected for the technique.

The actual X-ray Tube heat unit value after pressing the “ On ” push-button
( Refer to Section 6.6 ).

The error messages during a system fault, preceded by the letter “E”
(a.e., E02) (
Refer to Section 6.9 ).
mAs DISPLAY can show:

The radiographic mAs value selected for the technique.

When an exposure is made with AEC, it shows the actual mAs at the end
of the exposure whenever the “
Prep ” push-button has not been released.

If an exposure is aborted by releasing the “ Exp ” push-button during the
exposure, it shows the actual mAs value until the “ AEC Reset ”
push-button is pressed to reset the error condition.
mA DISPLAY : Shows the radiographic mA value selected for the technique.
Time DISPLAY can show:

The Time value (in seconds) selected for the radiographic technique.

When an exposure is made with AEC, it shows the back-up time during
the exposure and the actual Time at the end of the exposure whenever
the “
Prep ” push-button has not been released.

If an exposure is aborted by releasing the “ Exp ” push-button during the
exposure, it shows the actual Time until the “ AEC Reset ” push-button is
pressed to reset the error condition.
RAD Displays can also show:

The actual Time, the calculated mAs, and the selected kVp and mA
radiographic parameters of the last exposure, with or without AEC, after
pressing the “
AEC Reset ” push-button (values flashing).

The exposure counters ( Refer to Section 6.7 ).