AGFA 5420/100, User Manual

Page: 11 / 188

DX-D 400
User Manual
0232F EN
20191213
1
SECTION 1 INTRODUCTION
This manual contains all the necessary information to understand and operate
the
DX-D 400 X-ray System. It provides a general description, safety
information, operating instructions and specifications concerning the
equipment. This manual is not intended to teach radiology or to make any type
of clinical diagnosis. It includes the different configuration possibilities;
Elevating Table or Fixed Height Table and Control Panel.
The Tube Support Column, the RAD Table and the RAD Wall Stand are
associated equipment to the X-ray Generator Unit.
Basically, the Rad System consists of the following associated subassemblies:
Tube Support with variable height, X-ray Tube, Collimator, RAD Table and RAD
Wall Stand. The RAD Table and the RAD Wall Stand can house AR (Analog
Radiography), CR (Computed Radiography) or DR (Digital Radiography).
The Control Panel of the Column is ergonomically built, equipped with controls
and indicators logically arranged and easily accessible. A soft thumb pressure
on the control buttons allows the linear and rotation movements.
Illustration 1-1
DX-D 400 X-ray System
DX-D 400 with RAD Fixed Height Table,
Column with Analog Control Panel
and RAD Wall Stand
DX-D 400 with RAD Elevating Table,
Column with Digital Control Panel
and RAD Wall Stand -- Manual Tilting