AGFA 5420/100 User Manual Download Page 123

Page: 123 / 188

DX-D 400

User Manual

0232F EN

20191213

113

SAVE

: Touch this button to save all the changes performed in the “

Edit

” menu

before exiting.

Illustration 5-2
Creating a New APR Technique

1. Touch on “Modify” button. The system requires
the operator password and the confirmation.

2. Touch on “Edit” button.

3. Select any Region , press on “New” and write
the name of the new Region. Repeat this procedure
in order to assign Views and Projections to the new
created Region.

4. Then select the Parameters, AEC selections and
Workstations for the New Region/View/Projection.

5. Touch on “Set Tech” button to set the selected
parameters / AEC Selections / Workstations.

7. Touch on “Quit” button.

6. Touch on “Save” button to save the data.

8. Touch on “Exit” button to go back to the Main
screen.

New Region

New View

New Projection

New Region

Summary of Contents for 5420/100





























































































































































































Search results

Summary of Contents for 5420/100

Reviews:

Brands by name

Popular brands

AGFA 5420/100, User Manual

Search results

Summary of Contents for 5420/100

Reviews:

Brands by name

Popular brands