Page 6
2. Setup
• Connect the power adaptor supplied with the product to the base unit. The base Power LED will light.
• Pull paper tab from the headset to activate the battery.
NOTE: The first time you use your headset, it is recommended that the headset is charged for a minimum of
3 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
• Using the headset cord supplied with the product, connect the telephone port on headset base with
the headset port on your telephone.
• Use the power adaptor supplied with the product to connect the headset base to a power socket.
• You may need to adjust the Handset Selector switch that is located on the bottom of the headset
base to find the correct wiring for your device.
2.2 Connecting to a telephone or terminal without a headset port
• Using the headset cord supplied with the product, connect the telephone port on headset base with
the handset port on your telephone.
• Connect the telephone handset cord to the handset port on the headset base.
• Use the power adaptor supplied with the product to connect the headset base to a power socket.
• You may need to adjust the Handset Selector switch that is located on the bottom of the headset
base to find the correct wiring for your device.
2.3 Connecting to a compatible Handset Lifter (refer to your supplier)
• Fit the handset lifter to your telephone as indicated in its user guide.
• Connect the handset lifter to the ‘AUX’ port located on the back of the Headset Base.
• Ensure that the EHS selection switch is set to ‘RHL’.
