Page 11
3.1.3 Making an outgoing call in USB/PC mode
• Ensure that the PC button on top of the headset base is selected.
• Lift the headset from the base or press the headset’s Call Answer/End button if you are already
wearing it and the base Headset in Use LED will light.
•
After finishing your call, press the Call Answer/End button to disconnect. The base Headset in Use
LED will turn off.
3.1.4 Making or receiving a Bluetooth call
• Ensure that the Mobile Device Selector button on top of the headset base is selected.
• Lift the headset from the base or press the headset’s Call Answer/End button if you are already
wearing it and the base Headset in Use LED will light.
• Make or answer the call on your Bluetooth device ensuring that the Agent Headset is selected as
your audio device
•
After finishing your call, press the Call Answer/End button on the headset or end call button on the
Bluetooth device to disconnect. The base Headset in Use LED will turn off.
3.2 Adjusting the Ringing Volume
When the headset is ringing to indicated an incoming call, you can adjust the ring volume with the volume
control buttons located on the headset.
3.3 Muting The Headset Microphone
To mute the headset microphone when on a call, press the Mute button on the headset.
While the headset is in Mute mode, a short beep will be heard on the headset every 8 seconds. Press the
Mute button again to release the mute.
3.4 Headset transmitting volume setting
You can adjust the transmit volume of the headset by using the two buttons located on the bottom of the
headset base.
3.5 Adjusting Headset Receive Volume
Use the volume control buttons on the headset to adjust the receive volume on your headset. You will hear a
beep sound for each volume step Up or Down.
3.6 Out of range and reconnection
You will hear a warning tone in the headset when you walk out of range of the base. The headset will be dis-
connected from the base and the call will be automatically placed on hold. If you move back inside the range
of the base the headset will automatically reconnect and the call will be active again.
NOTE: If you do not move back inside the base range within 5 minutes the call will be disconnected
