Page 10
3. Operation
3.1 Making and Receiving Calls
3.1.1 Making an outgoing call in Telephone mode
• Ensure that the Telephone button on top of the headset base is selected.
• Lift the headset from the base to start a call. If you are already wearing the headset, press the
headset’s Call Answer/End button. The base Headset in Use LED will light. If a handset lifter or
Electronic Hookswitch device is connected to the headset base, the line will be seized. Otherwise,
you will also need to activate the Headset port via your telephone terminal.
• Dial the telephone number on the telephone terminal
•
After finishing the call, replace the headset on the base or press the Call Answer/End button to
disconnect. The Headset in Use LED will turn off.
3.1.2 Receive an incoming call in Telephone mode.
• If there is an incoming call from the telephone line and the headset base is connected to a handset
lifter or Electronic Hook switch device, the Telephone LED and Headset in Use LED will flash, also a
ring tone will be heard on the headset.
• Lift the headset from the base to answer the call. If you are already wearing the headset press the
headset’s Call Answer/End button. The base Headset in Use LED will light. If a handset lifter or
Electronic Hookswitch device is connected to the headset base, the line will be seized. Otherwise,
you will also need to activate the headset port via your telephone terminal.
• To end the call, replace the headset on the base or press the headset Call Answer/End button.
