Position:
Roof lining, centre right
743.810.090.120
NOTE:
Recalibration of the tachograph after a tire change
Always calibrate the tachograph after a rear tire
change. Failure to do so can cause incorrect
tachograph recordings.
The Operator's Manual contains all important
information.
Position:
Rear of vehicle, left-hand side of ball
holder
743.500.410.130
NOTE:
Refer to the Operator's Manual when
mounting implements on the rear power lift.
Position:
Rear of tractor, above hydraulic couplings
743.500.410.100
NOTE:
Switch lever for rear power lift, single-acting
or double-acting
Position:
Engine, on the valve cover
411.201.010.010
NOTE:
Do not re-tighten the cylinder head bolts
During initial setup and after repair work, the
cylinder head bolts are tightened in accordance with
the relevant instruction sheet and must not be re-
tightened.
1. Tractor
FENDT 700 Vario S4
1-17
X990.005.538.013