14
MODULAR EXPANSION SY
EDT tablet
adding specific modules. These modules can be example
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
The expansion module
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
from t
EDT technical support will be limited for these devices.
FIG.2
To add the expansion module: Open the screws and remove the cover
secure it with two screws.
DIAGNOSTIC TERMINAL
NOTE:
FIG.23
Insert the battery packs
hear a click when the battery is properly seated. Then slide the battery
Locate the AC adapter and the power cord
connection cable into the DC In port (2) on
plug the power cord into an external power socket.
IMPORTANT:
The
switch emits a blue glow (about 2
When the system powers on for the first time, Windows
14
MODULAR EXPANSION SY
EDT tablet
PC features a modular expansion system that allows you to add task purposed functionality simply by
adding specific modules. These modules can be example
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
The expansion module
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
from the case to use the expansion module
EDT technical support will be limited for these devices.
FIG.21 &
FIG.2
To add the expansion module: Open the screws and remove the cover
secure it with two screws.
DIAGNOSTIC TERMINAL
NOTE: Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
FIG.23
& FIG.24
Insert the battery packs
hear a click when the battery is properly seated. Then slide the battery
Locate the AC adapter and the power cord
connection cable into the DC In port (2) on
plug the power cord into an external power socket.
IMPORTANT:
power for the first time.
The power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and
switch emits a blue glow (about 2
When the system powers on for the first time, Windows
MODULAR EXPANSION SY
PC features a modular expansion system that allows you to add task purposed functionality simply by
adding specific modules. These modules can be example
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
The expansion module
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
he case to use the expansion module
EDT technical support will be limited for these devices.
IG.22
To add the expansion module: Open the screws and remove the cover
secure it with two screws.
DIAGNOSTIC TERMINAL
Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
FIG.24
Insert the battery packs
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
hear a click when the battery is properly seated. Then slide the battery
Locate the AC adapter and the power cord
connection cable into the DC In port (2) on
plug the power cord into an external power socket.
IMPORTANT: Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
power for the first time.
power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and
switch emits a blue glow (about 2
When the system powers on for the first time, Windows
MODULAR EXPANSION SYSTEM
PC features a modular expansion system that allows you to add task purposed functionality simply by
adding specific modules. These modules can be example
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
he case to use the expansion module
EDT technical support will be limited for these devices.
To add the expansion module: Open the screws and remove the cover
DIAGNOSTIC TERMINAL SET
Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
hear a click when the battery is properly seated. Then slide the battery
Locate the AC adapter and the power cord
connection cable into the DC In port (2) on
plug the power cord into an external power socket.
Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
power for the first time.
power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and
switch emits a blue glow (about 2-4 seconds). Release the switch. The diagnostic terminal will now boot up.
When the system powers on for the first time, Windows
STEM
PC features a modular expansion system that allows you to add task purposed functionality simply by
adding specific modules. These modules can be example
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
he case to use the expansion module
slot, along with the power requirements, use these devices only as needed.
EDT technical support will be limited for these devices.
To add the expansion module: Open the screws and remove the cover
SET-UP
Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
hear a click when the battery is properly seated. Then slide the battery
Locate the AC adapter and the power cord. Plug the power cord securely into the AC adapter. Plug the AC adapter
connection cable into the DC In port (2) on top of the diagnostic terminal.
plug the power cord into an external power socket.
Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and
4 seconds). Release the switch. The diagnostic terminal will now boot up.
When the system powers on for the first time, Windows
PC features a modular expansion system that allows you to add task purposed functionality simply by
adding specific modules. These modules can be example USB x2 adds,
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
slot, along with the power requirements, use these devices only as needed.
EDT technical support will be limited for these devices.
To add the expansion module: Open the screws and remove the cover
Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
hear a click when the battery is properly seated. Then slide the battery
. Plug the power cord securely into the AC adapter. Plug the AC adapter
top of the diagnostic terminal.
Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and
4 seconds). Release the switch. The diagnostic terminal will now boot up.
When the system powers on for the first time, Windows
®
may have a few questions in order to localize the installation.
PC features a modular expansion system that allows you to add task purposed functionality simply by
USB x2 adds, WWAN module adds, SCAN module adds or
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
slot, along with the power requirements, use these devices only as needed.
To add the expansion module: Open the screws and remove the cover. Press down gently to
Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
hear a click when the battery is properly seated. Then slide the battery-locking tab up to the locked position (1).
. Plug the power cord securely into the AC adapter. Plug the AC adapter
top of the diagnostic terminal. Once the adapter plug is securely in place,
Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and
4 seconds). Release the switch. The diagnostic terminal will now boot up.
may have a few questions in order to localize the installation.
PC features a modular expansion system that allows you to add task purposed functionality simply by
WWAN module adds, SCAN module adds or
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
slot, along with the power requirements, use these devices only as needed.
. Press down gently to
Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
locking tab up to the locked position (1).
. Plug the power cord securely into the AC adapter. Plug the AC adapter
Once the adapter plug is securely in place,
Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and
4 seconds). Release the switch. The diagnostic terminal will now boot up.
may have a few questions in order to localize the installation.
PC features a modular expansion system that allows you to add task purposed functionality simply by
WWAN module adds, SCAN module adds or
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
Please note that you have to install the corresponding driver before you plug in the module for
the first time.
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
slot, along with the power requirements, use these devices only as needed.
. Press down gently to attach the module and
Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
locking tab up to the locked position (1).
. Plug the power cord securely into the AC adapter. Plug the AC adapter
Once the adapter plug is securely in place,
Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and
4 seconds). Release the switch. The diagnostic terminal will now boot up.
may have a few questions in order to localize the installation.
PC features a modular expansion system that allows you to add task purposed functionality simply by
WWAN module adds, SCAN module adds or
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
the first time.
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
slot, along with the power requirements, use these devices only as needed.
attach the module and
Make sure hands are clean of grease, water or excessive grime before touching or turning on the unit.
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
locking tab up to the locked position (1).
. Plug the power cord securely into the AC adapter. Plug the AC adapter
Once the adapter plug is securely in place,
Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
power switch (3) on the top of the terminal is the main power toggle. Slide the switch to the right and hold until the
4 seconds). Release the switch. The diagnostic terminal will now boot up.
may have a few questions in order to localize the installation.
PC features a modular expansion system that allows you to add task purposed functionality simply by
WWAN module adds, SCAN module adds or
P.O.S module. The expansion module can be added or removed without having to shut down or restart the system.
slot cannot be accessed with the terminal inside the bump case. Most devices extend out past
the edge of the terminal which prevents the terminal from being used with the case. Since the terminal must be removed
slot, along with the power requirements, use these devices only as needed.
attach the module and
and make sure that they are locked. Align the battery in the bay and slide it into place. You will
. Plug the power cord securely into the AC adapter. Plug the AC adapter
Once the adapter plug is securely in place,
Allow the battery to charge fully before disconnecting the diagnostic terminal and running on battery
hold until the
may have a few questions in order to localize the installation.
