EN
3
www.afx-light.com
down before replacing or servicing.
•
DO NOT OPEN the unit within 5 minutes after switching off.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use the same type of
spare parts.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Avoid direct eye exposure to the light source while it is on as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!.
•
The product is for decorative purposes only and not suitable as a household room illumination.
•
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
•
The lenses, housing or ultraviolet filter must be replaced if they are visibly damaged.
•
The light source of this device is not replaceable. If it is defective, the entire unit must be discard
-
ed.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
FEATURES
• 10/12/14/16 DMX channels
• Sound active, DMX, auto, master-slave mode
• 1 static Gobo Wheel: 8 gobos + open, rotation and shake
• 1 rotating Gobo Wheel: 6 gobos +open, rotation and shake
• Color Wheel: 7 white, rotation with variable direction and speed
• Prism: 3-facet Prism, bi-directionally rotatable at variable speeds
• Automatic focus
• High quality optics
• 3-phase Pan/Tilt motor
• 15° beam angle
• High speed strobe effect with 1-25 flashes per second
• Color LCD
• Efficient low noise fan cooling system
• Two ¼ turn fastening omega clamps
• POWERCON IN/OUT
• 3-pin XLR connectors IN/OUT
• IP20 protection rating
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly
fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.
Never stand directly below the device when mounting, removing or servicing the fixture.
ORIENTATION
This fixture may be mounted either vertically on a ceiling or truss, or placed on a level surface,
provided there is adequate room for ventilation.
