Afriso EURO-INDEX 43790 Operating Instructions Manual Download Page 4

Page: 4 / 40

This instruction manual

Europress

1 This

instruction

manual

This instruction manual is part of the product.

Read this manual before using the product.

Keep this manual during the entire service life of the product
and always have it readily available for reference.

Always hand this manual over to future owners or users of the
product.

1.1

Precautions

WARNING TERM

Type and source of the danger are shown here.

Precautions to take in order to avoid the danger are shown
here.

There are three different levels of warnings:

Warning Term

Meaning

DANGER

Immediately imminent danger!
Failure to observe the information will result in
death or severe injuries.

WARNING

Possibly imminent danger!
Failure to observe the information may result in
death or severe injuries.

CAUTION

Dangerous situation!
Failure to observe the information may result in
minor or severe injuries as well as damage to
property.

1.2

Explanation of symbols and typeface

Symbol

Meaning

Prerequisite for an activity

Activity consisting of a single step

Activity consisting of a several steps

Result of an activity

•

Bulleted list

Text

Indication on display

Highlighting

Highlighting

Summary of Contents for 43790









































Search results

Summary of Contents for 43790

Reviews:

Related manuals for 43790

Brands by name

Popular brands

Afriso EURO-INDEX 43790, Operating Instructions Manual

Search results

Summary of Contents for 43790

Reviews:

Related manuals for 43790

Brands by name

Popular brands