Mounting
and
commissioning
Europress
15
4.
Close the leak detector.
6.4
Electrical connection
Mains voltage is interrupted and cannot be switched on by acci-
dent.
1
Pressure switch
2
Pump
3
Cable routed through
upper cable gland
4
Cable routed through
bottom cable gland
5
Relay fuse
6
Relay connection
7
Mains connection
Fig. 5: Electrical connection
Connect the leak detector directly to the supply network without
a switch and without a plug!
If you want to route the mains or relay cable trough the top of
the housing, replace the rubber grommet at the top of the hous-
ing by the enclosed cable gland.
Close any cable glands at the bottom of the housing that are not
used by means of the enclosed plugs.
Summary of Contents for 43790
