15
1.6. Marking and sealing
1.6.1. The marking on the front panel of the CS contains:
- Flow meter's name and designation
- Nominal diameter
- Pulse weight on the universal output
- Maximal pressure
- Case protection
- Minimal, nominal and maximal measured average volumetric flow rate
- Production year
1.6.2. The cap covering J1 terminal, used to enable modification of calibration
settings, is sealed after performing calibration (see Fig.A.2, Appendix
A).
1.6.3. J2 terminal used to enable modification of flow meter's operation set-
tings is sealed on completing start-up procedures and putting the De-
vice into operation.
1.6.4. To protect the device from unauthorized access during transportation,
seals may be hung through the lugs located on the front and rear
panels.