25
Fig.11. "Data Log" window
4.1.7. If the flow meters are connected in a network, open the "
Program
Settinds
" tab (Fig.12).
Fig.12. "Program Settings" window
The window options make it possible to establish connection between
the networked flow meters via RS-485 interface.
4.1.8. Set the flow meter to OPERATION mode (remove the jumper from J2
terminal). Terminal J2 should be sealed. If necessary, seals may be
hung through the lugs located on the front and rear panels of the CS
case.
NOTE: In SERVICE and OPERATION modes, the user is not al-
lowed to modify the parameters displayed in the "
USS Settings
" tab.
