HOW TO REPLACE THE CUTTING MAT
1. Remove the cutting mat.
-The cutting mat is attached to the cutting base (fig.2)
-Please remove only the cutting mat from the cutting mat base from the location
shown by the arrow (A) (fig.1)
- After removing the cutting mat, please make sure that there is no adhesive tape
or other adhesives left on the cutting base.
- Please clean the cutting mat base before installing the cutting mat.
- Installing the cutting mat with the remaining adhesive may affect cut quality.
2. Installing the cutting mat.
- Fit the cutting mat with the front cutting base grooves (fig.3) and attach it from
the location shown by the arrow (A) (fig.1) while peeling off the release paper.
CAUTION:
Please turn off the power when replacing the cutting mat.
Please move the tool carriage to “A” position allowing
for ease of work.
30
