manualshive.com logo in svg

AFINIA LABEL DLF-220L, User Manual

The AFINIA LABEL DLF-220L user manual is an essential resource for getting the most out of your product. Download it for free from manualshive.com to access step-by-step instructions and helpful tips. This comprehensive manual ensures a hassle-free experience, allowing you to maximize the potential of your AFINIA LABEL DLF-220L.

Share
Download
background image

After the CUT TEST where users set 

the cutting quality required, press 

“

START

” to cut few labels to get 

enough media to allow the matrix 

remover module loading.

Pull the media through the aluminium 

rollers first (the guide can be adjusted 

in order to prevent the web from rolling) 

then through the clutch system.

Close the loading system and the 

media will be automatically loaded into 

the clutch path.

The user can adjust the clutch force thanks to the position of the clutch system.

Maximum Cluth (rewinded roll more tight)
Minimum Cluth (rewinded roll less tight)

HOW LOAD THE MATRIX REMOVER & SLITTER

Pull the sides of the black knobs and lift up the clutch system, other black knobs will keep 

it open.

Minimum clutch

Maximum clutch

11

Summary of Contents for DLF-220L










































Reviews:

No comments

Related manuals for DLF-220L

Brands by name

Popular brands

Load more brands