The cutting shape and the black-mark can be placed anywhere inside the layout file, the
cutting shape does not require any special color and thickness.
The black-mark must be always the object placed in the lower left corner of the layout file.
The DLF Cutting Manager (DLF CM) work with the VECTOR PDF FILE. You can
create this file with Adobe Illustrator or Corel Draw.
minimum distance from
left side of label graphics
4 mm (0.16”)
black-mark
can overlap
label on
bottom
Black-mark size: 4mm x 4mm (0.16” x 0.16”) or 2mm x 2mm (0.08” x 0.08”)
4mm is the minimum distance betwen black-mark
and label graphics on bottom side.
Black-mark
MUST
be the leftmost object.
for round or complex labels
black-mark can partially
overlap the left side of label.
19
BLACK-MARK POSITION INTO THE CUTTING FILE AND PRINTED ARTWORK
