![background image](http://html.mh-extra.com/html/afe-power/77-46306/77-46306_instruction-manual_2864076003.webp)
aFepower.com
Page 3
Step 1: Before installing the aFe module, you will have to place the vehicle ECU in sleep
mode. In order to place the vehicles ECU insleep mode you will need to do the
following:
1) If the engine is cold, open the hood, close the doors, lock the car and wait 30 seconds.
2) If the engine is warm, open the hood, close the doors, lock the car and wait 20 minutes.
3) If the engine is warm and you can’t wait 20 minutes, disconnect the battery.
Installation
A
C
B