![background image](http://html.mh-extra.com/html/afe-power/77-46306/77-46306_instruction-manual_2864076006.webp)
Refer to Figures C for steps 7-9
Step 7: Disconnect the MAP sensor harness. (Circled in white.)
Step 8: Locate the MAP sensor jumper harness on the aFe module. It is a 4 wire harness with
tan, black, yellow and blue colored wires.
Step 9: Plug the female connector on to the stock engine harness and the male connector to the
MAP sensor as shown in detail picture.
Figure C
Page 6
INSTALL