Afag UG 20 NC Montage & Maintenance Instructions Download Page 32

Page: 32 / 36

UG 20-UG 25-OI-vers. 3.5 gb. 20190409

4.1.4 Disassembly and repair

When the module is damaged it can be returned to Afag Automation AG for repair.

CAUTION

The module may only be disassembled when the system is
aerated and deactivated. If pneumatic connections are

disconnected when they are under pressure, this may result in
serious personal injury due to fast movements of moving parts.

When can the modules be repaired by the customer?
Wearing parts

can be exchanged by the customer itself when the guarantee has

expired.

NOTE

All the other faulty parts must exclusively be replaced by
company Afag Automation AG!

When the customer detects that the respective module is still under
guarantee:

- He returns the module to company Afag Automation AG for repair.
- If the guarantee has already expired, the customer must decide whether he

repairs the module by himself and orders the wearing parts kit or whether he
returns the module to company Afag Automation AG for repair.

NOTE

Afag offers a reliable repair service. Please note that Afag does not
guarantee for parts which were not repaired by Afag Automation AG.

Summary of Contents for UG 20 NC





































Search results

Summary of Contents for UG 20 NC

Reviews:

Related manuals for UG 20 NC

Brands by name

Popular brands

Afag UG 20 NC, Montage & Maintenance Instructions

Search results

Summary of Contents for UG 20 NC

Reviews:

Related manuals for UG 20 NC

Brands by name

Popular brands