14
UG 20-UG 25-OI-vers. 3.5 gb. 20190409
3.1.5 Guarantee
3.1.6 Areas of application
The UG 20/25 are exclusively designed for the gripper movement of load capacities
of up to UG 20 gripping forces open178 N (closed 150 N); UG 25 gripping forces
open 334 N, (closed 300 N).They can also be used in combination with other
modules than Pick &Place machines, and allowed gripping forces may not become
exceeded.
Any other use is regarded as inadequate.
NOTE
The manufacturer does not accept any liability for damage
resulting from such use. The risk is that of the user alone.
Intended use also includes paying attention to the Montage Instructions and
observing the maintenance and repair instructions specified by the manufacturer.
The UG Universal gripper may only be operated and serviced by correspondingly
trained personnel who have also profound knowledge of the dangers.
CAUTION
The applicable regulations for prevention of accidents and the
other generally accepted safety-relevant and occupational
safety and health regulations are to be followed.
The term of the warranty on Afag handling components and systems is:
24 months following commissioning, but a maximum of 27 months following delivery.
Wear parts (e.g. shock absorbers) are not covered by the warranty. *
The warranty covers the replacement or repair of defective Afag parts. No further claims will be
accepted.
The warranty will be voided in event of the following:
Use for other than the intended purpose
Failure to observe the notes on installation, commissioning, operation and maintenance in
the operating manual
Improper installation, commissioning, operation and maintenance
Independent repairs and constructional changes without prior instruction by Afag
Automation AG
Removal of the serial number on the product
Using the module without shock absorbers, or with defective shock absorbers
Inadequate monitoring of wear parts
*A customer has the right to a defect-free product. This is also applicable for accessories and wear parts, if they are
defective.
However, wear does not fall within the scope of the warranty.
Summary of Contents for UG 20 NC
