UG 20-UG 25-OI-vers. 3.5 gb. 20190409
11
3.1.1 Symbols
Assembly and initial start-up must be carried out by qualified personnel only and
according to these instructions.
CAUTION
Indicates a possibly dangerous situation.
Non-compliance with this information can result in damage to
property or light to medium personal injuries.
NOTE
Indicates general notes, useful operator tips and Installation
recommendations which don't affect safety and health of the
personnel.
3.1.2 General description
The series of the UG 20/25 Universal gripper is used for the linear, smooth
movement of rigidly mounted loads under the ambient and Installation conditions
defined, see Technical data.
The UG 20/25 Universal gripper can be installed in the horizontal or vertical position.
Modifications on the UG 20/25 Universal gripper that are not described in these
Montage Instructions or have not been approved in writing by Afag Automation AG
are not permitted. In case of improper changes or assembly, installation, operation,
maintenance or repairs, Afag Automation AG rejects all liability.
Summary of Contents for UG 20 NC
