Albert 2 User Manual
February 2018| ©AEVI International GmbH
PAGE 8/46
•
Never plug in or unplug data communication lines during thunderstorms.
•
Protect devices from vibrations, dust, moisture and heat.
•
Keep sufficient distance from other electrical devices such as a security tag canceller (approx.
50 cm) so that no malfunctions of the terminal will occur.
•
Never try to open the terminal. In the event of unauthorized opening, all security-related data
will be lost, rendering the device unusable. Repairs must be carried out only by the
manufacturer.
•
Never dip the device into water, throw it into fire or expose it to high humidity. Wipe the
device with a soft cloth slightly moistened. Never use detergents. Do not expose the device to
temperatures above 45 °C as e.g. it may be behind glass with direct sun radiation and do not
expose the device to temperatures below -5 °C.
•
Removing or damaging type labels or seals on the device will invalidate your warranty and
liability protection.
•
During normal use of the card reader (no soiled cards, indoor usage) clean the card reader
once a week with an appropriate cleaning card (dry or moistened). During frequent use under
difficult conditions (e.g. soiled fleet cards or fuel cards, outdoor usage) clean the card reader
every day with an appropriate cleaning card (dry or moistened).
•
There is no warranty for using non-released products (e.g. external charging adapters, power
supply units, batteries, cables).
•
The battery must be charged at least three hours before operation. Otherwise an error may
occur.
•
At the end of its operational lifetime, dispose of the terminal and battery in an environment-
friendly manner.