Albert 2 User Manual
February 2018| ©AEVI International GmbH
PAGE 16/46
Power Supply with country specific AC cable
Please note that each of the above-mentioned modules is an integral part of the Albert 2. Attaching
and detaching these modules (e.g. the printer module) must only be done in case of maintenance
and when the device is powered off.
Attaching and detaching these modules when the device is powered on can lead to malfunctions and
may damage the unit.
4.5.1
Mounting of the connectivity box
The connectivity box has mounting holes, which are compliant with the VESA standard (50mm x
20mm).
4 Mounting screws of 4mm diameter, 0.7 pitch and 6mm length are required.
