Albert 2 User Manual
February 2018| ©AEVI International GmbH
PAGE 38/46
Caution:
The Li-Ion battery cannot be charged at ambient temperatures higher than 35 °C (95 °F).
A
warning
indicates a low battery level.
11.2.1
Charging Station (Cradle)
•
Insert the DC power cord of the power pack into the charging station.
•
Plug the AC power cable into the power pack and the other end into a wall outlet.
•
Insert the payment terminal into the charging station. The charging process starts as soon as
the device to be charged is placed on the station. Make sure that the device is properly
placed on the cradle. The LED lights white through during charging.
11.3
Cleaning
11.3.1
Magnetic Stripe Reader
To guarantee good results, the Magnetic Stripe Reader should be cleaned from time to time.
11.3.2
Screen
Ideally, use a very small amount of water with a lint-free, scratch resistant cloth (microfiber is best) to
clean your Albert 2 screen by dampening the cloth slightly. Then clean the screen using soft, even
strokes.
11.3.3
Printer
It is recommended that the print head of the thermal printer be cleaned regularly.
For effective cleaning, you should use a lint-free rag with isopropyl alcohol.
