Mirage Digital Evolution
AEV Broadcast Srl via della Tecnica 33, 40050 Argelato Bologna ITALY
www.aev.eu [email protected]
33
10.3 Input & output Encoder MPX (only MPX version)
The stereo encoder has an unbalanced output on a BNC connector located at the back
panel. This output can drive an impedance of 50 or 75 KHz at a maximum distance of 10 meters via an
RG 58 cable without visible degradation of the MPX signal.
There is also an input that can accept SCA and RDS signals that can be adjusted by running in the
CODER menu.
An output also provides synchronization of an external system: SYNC 19 KHz OUT 1 Vpp SW for
external encoder synchronization.
10.4
Sample connection Analog & AES/EBU
OUTPUT
INPUT
1 = GROUND
1 = GROUND
2 = INPHASE
2 = INPHASE
3 = RETURN
3 = RETURN
