Mirage Digital Evolution
AEV Broadcast Srl via della Tecnica 33, 40050 Argelato Bologna ITALY
www.aev.eu [email protected]
18
•
CLIPPER
: to adjust the value of Clipper, the range is from 0 to 40 ( 26 to manage the max deviation
to 75 KHz).
•
SAMPLE RATE
sets the sampling value of the digital signal.
Selectable values are 32, 48 and 96 KHz.
By placing the cursor on the box, a knob pressure activates the value change, after selecting the
desired value (32, 48 and 96 KHz), the additional pressure sets the value shown in the box.
•
LEV
adjusts the output signal level. Allows you to adjust the output signal from -12 dB to + 12 dB,
a horizontal bar graphically displays the setting; The numeric value in dB is displayed in the box
below. By placing the cursor on the box, the modification of the mode is activated by the knob
pressure, then, with the rotation of the knob, the adjustment is made, by rotating counterclockwise
decreasing values are applied, clockwise, however, increasing values are applied , The additional
pressure sets the value indicated in the box; The next knob pressure sets the adjustment to the
displayed value.
The two bars on the right side display the dynamic trend of the left and right output signal levels.
To save the changes to the values in this form, position the cursor on the
SAVE
button and press the
Jog knob once, at the knob pressure you save the changes and return to the MENU’
To exit the mask, position the cursor on the
ESC
button and press the Jog knob while pressing the
knob returns to the MENU’
5
Page PROCESS
5.1
1th Section
In this section, all the audio process parameters are displayed to customize the configuration curve
that is applied to the audio signal.
Sound quality defines the image and professionalism of the broadcaster, so it becomes apparent the
importance of the AUDIO PROCESSOR.
Multiband Structure is the best way to process audio signal, Mirage Dig Evo is based on the process of
audio signal in multiband mode.
Each curve has the ability to have full control of the process parameters so as to give your issuer a
competitive sound with greater strength, continuity, presence and clarity without pumping or other
unnatural effects.
In the form, next to the name of the page (PROCESS), the name of the curve running.
