Mirage Digital Evolution
AEV Broadcast Srl via della Tecnica 33, 40050 Argelato Bologna ITALY
www.aev.eu [email protected]
14
4.2.4
Page DIGITAL OPTIC INPUT
On the DIGITAL OPTIC INPUT page you can change the level and balance values of the audio
signal at the optical digital input.
Rotating the encoder knob scrolls between the items on the bottom of the display:
•
LEV
, Adjusting the Analog Input Signal
•
BAL
, adjusting the analog input signal balance
•
ESC
, button to exit the mask and return to the general menu
•
SAVE
, a button that saves the changes made
LEVEL
function:
• Place the cursor on
LEV
• A pressure on the knob enables the variation of the level of the analog input signal
• Turning the knob clockwise increases the signal level
• Turning the knob counter-clockwise decreases the signal level
• The value of signal variation is displayed graphically by means of a vertical bar and the
corresponding value at the base of the bar, both vertically positioned above the
LEV
button
BALANCE
function:
• Place the cursor on
BAL
• Pressing on the knob enables the balance of the stereo analog input signal balance
• The center position of the bar (
L = R
) equals no change in the original balance of the input
stereo signal
• Turning the knob clockwise moves the balance toward the right channel (
R
)
• turning the knob counterclockwise moves the balance to the left channel (
L
)
• The value of the signal variation is displayed graphically by means of a vertical bar and the
corresponding value in the box at the base of the bar, both placed above the
BAL
button
To save the changes made to this mask, place the cursor on the
SAVE
button and then press
the Jog knob once, the variations will be saved when you press the knob and return to the
MENU screen.
