Mirage Digital Evolution
AEV Broadcast Srl via della Tecnica 33, 40050 Argelato Bologna ITALY
www.aev.eu [email protected]
19
•
PRESET :
to display and set the ON AIR process
•
30 Hz :
to active the 30 Hz hight pass filter
•
ENHANCER :
ON/OFF
Functions:
•
PRESET
displays the active curve and allows you to select and activate a curve between the stored
curves. Positioning the cursor on the box activates the curve selection by pressing the knob, then
rotating the knob, selecting the curve you want to recall, the further fixed pressure airs the curve
shown in the box and, in the Below, recalls all parameters values of the selected curve
•
30 Hz FILTER
Allows the 30 Hz filter to be switched on / off. Filter activation is recommended to avoid noise in the
lower edge of the audio band.
By positioning the cursor on the box, you activate the mode modification by pressing the knob, after
selecting the desired mode (ON / OFF), the additional pressure sets the value indicated in the box.
•
ENHANCER
With Enhancer, you can increase the spatial image of the stereo sound. With active Enhacer function
will increase the feeling of Loudness, with greater depth and spatiality of the sound, as well as a high
dynamic of the sound itself. The Enhancer function allows a similar effect to a "wide" separation
between left and right channels. This effect is achieved by adding a portion of the other to each
channel, but in a reverse phase. By modifying this, the L-R and L + R ratio produces a more
stereophonic sound, creating a very strong acoustic effect, especially on the audio details.
Includes activating / deactivating the ENHANCER function. By placing the cursor on the box, you
activate the mode change by pressing the knob, after selecting the desired mode (ON / OFF), the
further pressing sets the selection shown in the box.
To save the changes to the values in this form, position the cursor on the
SAVE
button and press the
Jog knob once, at the knob pressure you save the changes and return to the MENU’
To exit the mask, position the cursor on the
ESC
button and press the Jog knob while pressing the
knob returns to the MENU’
