Aethra vega X5, User Manual

Page: 90 / 108

90
System Diagnostics
The System’s diagnostics menu allows you to perform tests and checks to verify that
the system is properly working.
From the
H
OME
P
AGE
select:
S
ETTINGS
/ D
IAGNOSTICS
The following page will be displayed:
Terminal test
This option performs an internal test of the system.
The test can be useful to diagnose audio/video problems encountered during a call.
The test uses encoded local audio and video to simulate a connection.
Press any keys to stop the test.
Interfaces
This option performs an internal test of the following interfaces:
•
“ A
UDIO
”.
For each input and output, peak values, noise and status can be visualized by means of
graphical view-meters; in addition, the transmission and reception streams can be seen.
Finally, it is possible to generate a tone (Tone Loc.) to test the speaker volume, and the selection of
“Tx Tone” during a connection will generate an audible tone at the remote system.
•
“
V
IDEO
”.
In this section you can view information on the active video input type and the video standard in
use.
•
“ N
ETWORK
”.
In this menu you can view information about the detected interfaces
For ISDN accesses an LED status indicator is available:
Red – access is disabled or in error.
Yellow – access is functioning, but Level 1 is not active.
Green – Level 1 is active.