Aethra vega X5, User Manual

Page: 21 / 108

21
Operation and use
This section of the manual explains the basic functionality of the System.
It is assumed that the system is correctly installed.
First time equipment is switched on
!
ATTENTION !!! You have to insert SW licence enabling code (AETHRA
SOFTWARE LICENCE KEY)
First time the system is switched on, you need to:
1. insert the licence code;
2. Set some Location parameters .
Licence code insertion
When the equipment is switched on for
the first time, the
L
ICENCES
page will
appear on the screen, and you can insert
the licence code.
Now several choices are available:
A) You can insert the licence code and enable it by pressing the
Enable licence
button.
B) You can going on using the system in TEMPORARY version by pressing the Start button;
L
OCALIZATION
page will appear to set several important parameters (see “Localization” §) and you’ll
have 12 hours working time (switched on system time); once ended, system will stop waiting for the
licence code.
In the status bar, below time indication,
remaining working time is shown.
C) insert a DEMO licence code and enable it by pressing the
Enable licence
button.
In the status bar, below time indication,
remaining working time is shown.
Note: to insert licence code after B) and C) choices, see the “Licences” §.