manualshive.com logo in svg

Aethra THE VOICE, Installation And User Manual

Share
Download
Aethra THE VOICE Installation And User Manual Download Page 6

-The Voice-

 

INSTALLATION AND USER’S MANUAL REV. 2                          

3.11. Hold 

..................................................................................................................17 

3.12. Flash  ..................................................................................................................17 

3.13. Recorder output ......................................................................................................17 

3.14. Switch settings ........................................................................................................17 

4. 

USING EXTENSION MICROPHONES ................................................................19 

4.1.  Connecting extension microphones ........................................................................19 

4.2.  Setting up of the external microphones for the best pickup ....................................19 

4.3.  Switching on a microphone .....................................................................................21 

4.4.  Muting a microphone...............................................................................................21 

5. 

TROUBLESHOOTING AND MAINTENANCE......................................................22 

5.1. Preventive 

maintenance..........................................................................................22 

5.2. Troubleshooting ......................................................................................................22 

6. TECHNICAL 

SPECIFICATIONS ..........................................................................25 

6.1.  Use and storage conditions.....................................................................................26 

6.2.  Reference regulations (CE mark and reliability tests) .............................................26 

7. FCC 

REQUIREMENTS ........................................................................................29 

8. 

CTR21 APPROVAL WARNING............................................................................31 

 

IV

 

TABLE OF CONTENTS   

Summary of Contents for THE VOICE


































Reviews:

No comments

Brands by name

Popular brands

Load more brands