-The Voice-
INSTALLATION AND USER’S MANUAL REV. 2
3.7.
Speaker Volume
When the call is in progress press and r VOL or - VOL several times to increase
or to decrease the volume through the speaker. The green light will blink each time you
depress the volume button. When the unit reaches maximum volume, the green light will
blink several times. There are 24 volume levels for speaker volume. After the
conversation has ended the AUDIO CONFERENCING UNIT reverts to the default volume
level.
3.8.
Redial
To dial the last telephone number dialed press REDIAL.
3.9.
Phone
For privacy, you may connect a regular phone to the Audio Supply Module. You may
revert to using the handset at any time.
When the UNIT is off, lift the heandset. The three LEDs on the corner will go off. You may
then use the handset to establish a call, to dial a telephone number or to end the call.
To go back to hands-free mode, hang-up the handset. The three LEDs will turn yellow.
!
Once a call is connected, you may also revert to using the handset.
First lift the handset, the three led on the corner will go off.
To return to hands-free mode, press
and hang up the handset.
3.10.
Mute
To cut off outgoing sound during a call, press MUTE. The LEDs will turn red. Your
microphones are off and your voice is not being transmitted. To switch off the mute, press
the MUTE key again. The LEDs will turn green.
16
CHAPTER 3. USING THE AUDIO CONFERENCE UNIT
