INSTALLATION AND USER’S MANUAL REV. 2
-The Voice-
7.
FCC REQUIREMENTS
This equipment complies with Part 68 of the FCC rules. On the rear panel of this
equipment is a label that includes, among other information, the FCC Registration
Number and Ringer Equivalence Number (REN) for this equipment. (The REN for the
ACU is 0.8). You must, upon request, provide this information to your telephone
company.
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have all those devices ring when your telephone number is called.
In most, but not all areas, the sum of the REN's of all devices connected to one line
should not exceed five (5.0). To be certain of the number of devices you may connect to
your line, as determined by the REN, you should contact your telephone company to
determine the maximum REN for your calling area.
If your telephone equipment causes harm to the telephone network, the telephone
company may discontinue your service temporarily. If possible, they will notify you in
advance. But if advance notice isn't practical, you will be notified as soon as possible.
You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper functioning of your equipment. If they do, you will
be notified in advance to give you an opportunity to maintain uninterrupted telephone
service.
!
WARNING
This device is designed for use with the Public Switched Telephone Network
(PSTN) into an analog phone line through an RJ11 jack (same type used with
fax machines. The telephone cable included with your AUDIO
CONFERENCING SYSTEM is for use with an RJ11 (standard single line)
telephone interface.
CHAPTER 7. FCC REQUIREMENTS
29
