INSTALLATION AND USER’S MANUAL REV. 2
-The Voice-
!
NOTE: you can also mute the entire system by depressing the mute button on
either of the 2 extension microphones
3.11.
Hold
To mute both the outgoing and incoming sound during a call, press SHIFT then MUTE.
The LEDs will turn on and flash red. While the hold function is being used, all
microphones and your speaker are off. To return to hands-free mode, press the MUTE or
the ON key again.
3.12.
Flash
When a call is in progress, press FLASH to transfer the call from one set to another. After
the dial tone has been heard, the caller can transfer the call by dialing the desired
telephone number and hanging up the UNIT by pressing the
.
3.13.
Recorder output
To record an audio conference session connect the recorder unit to the RCA jack
available on the AUDIO SUPPLY MODULE.
3.14.
Switch settings
The switches on the bottom of the ACU let you adjust the phone ringer volume.
FUNCTION
RING LEVEL
HIGH
+4 dB
LOW
-8 dB
SILENT
-100 dB
CHAPTER 3. USING THE AUDIO CONFERENCE UNIT
17
