ROBÒ TR800 Instruction Manual
EN
EN
7
CHARGING THE BATTERY
FIRST ROBÒ CHARGE
LOW BATTERY LEVEL
TOTAL CHARGING TIME
When charging ROBÒ for the first time, place it
on the charging dock until the battery is fully
charged.
Once charging terminates, the flashing blue light
on the push-button panel
becomes steady.
FLASHING BLUE LIGHT
Charging in progress
STEADY BLUE LIGHT
Charging completed
STEADY RED LIGHT
ROBÒ flat
WARNING
Leave ROBÒ to charge on the charging dock
until the flashing blue light turns off.
STAND-BY
BATTERY REPLACEMENT
Once ROBÒ has been fully charged, it enters the
STAND-BY mode.
To reactivate ROBÒ, press the button
for 1 second.
TIPS FOR USE
For improved cleaning efficiency, inspect the areas involved beforehand and prepare them as follows:
•
Clear the surfaces of the home from any obstacles that can be struck during cleaning, move any objects
lying in the way such as electrical cables, shoes, handbags with straps, magazines and newspapers, remove
light rugs, vases and fragile furnishings, toys scattered on the floor, place chairs above the tables, raise
curtains or sofa covers with fringes touching the floor, and lift bowls for pet food.
•
Be careful with objects in precarious balance that can be struck by the robot directly or indirectly. Check
that any open doors are not closed after colliding with ROBÒ, blocking the latter inside the room and
preventing it from returning to the charging dock.
•
ROBÒ performs its cleaning cycle regularly even if domestic animals are present. Any zones of the home to
be excluded from ROBÒ’s path can be delimited using the magnetic barrier accessory (supplied).
If the battery level is below 20%, ROBÒ will not be able
to function.
In such case, it must be placed manually on the charging
dock and left there until the battery charges fully.
If the battery is completely flat, it may take roughly
2 hours to charge completely.
Lithium batteries constitute special
solid waste that must be disposed of
according to the applicable regulations.
If prolonged periods of non-use are expected,
charge the battery fully, remove it and store it in a
cool and dry place.
PLEASE NOTE
When the battery is exhausted, it must be replaced
with a new original one. The instructions for replacing
the battery are included in the spare part’s package.
AVOID
RECOMMENDED
delimitation
magnetic barrier
ANTI-FALL SENSORS
•
ROBÒ is equipped with anti-fall sensors to stop it in presence of stairs (balconies, middle floor, etc…)
Stairs with very rounded protrusions can create anti-fall sensors malfunction, in this case we recommend to use
the delimitation magnetic barrier (ATR802).
•
Anti-fall sensors do not guaranty that ROBÒ stops in the presence of balconies and middle floor, is compulsory
to use a magnetic barrier (ATR802) or an adequate mechanical protection.
Use the delimitation
magnetic barrier (ATR802)
The delimitation magnetic
is not necessary
rounded protrusions
straight protrusions
magnetic
barrier
