ROBÒ TR800 Instruction Manual
EN
EN
6
INSTALLATION
INSTALLING THE CHARGING DOCK WITHOUT THE SELF-CLEANING BASE
INSTALLING THE CHARGING DOCK WITH THE SELF-CLEANING BASE
Position the charging dock at least 100 cm
away from stairs, empty zones and walls,
so that ROBÒ can leave the charging dock
freely.
Make sure that the floor is flat and that the
rear part of the self-cleaning base on which
the robot is inserted touches the wall.
Make the electrical connection to power the
charging dock as shown in the picture.
DOMESTIC ENVIRONMENTAL CONDITIONS
For optimal results, the temperature of the
domestic environment must be between 10°C and
40°C.
Prevent direct sunlight from reaching the charging
dock as it may interfere with the communication
and hamper the regular operation of ROBÒ.
PLEASE NOTE
Connect the self-cleaning charging base to the
central vacuum unit.
(Instructions for installing the self-cleaning charging
base to a central vacuum unit)
In this solution, the self-cleaning base is connected to a central vacuum unit to eliminate the
dust collected by ROBÒ without the user’s direct intervention.
vacuum socket
CONNECTION DIAGRAM
floor
self-cleaning base
dust vacuum line
connected to the
central vacuum unit
charging dock
protective cover
vacuum socket
self-cleaning base interface with the vacuum socket
ROBÒ
domestic power
supply
recommended
distance
100 cm
minimum distance
100 cm
recommended
distance
100 cm
recommended
distance
100 cm
recommended
distance
100 cm
ACTIVATING / DEACTIVATING THE AUTOMATIC SELF-CLEANING FUNCTION
The self-cleaning function can only be performed with the self-cleaning base.
To disable this setting, move ROBÒ off the self-cleaning charging base and
simultaneously press and hold for 3 seconds the button and the front
collision guard, or disable it via the TUBO’ ROBÒ app.
CONNECTING THE CHARGING
DOCK TO THE POWER SUPPLY
domestic power
supply
minimum distance
100 cm
