ROBÒ TR800 Instruction Manual
EN
EN
8
200 cm
Spot
CLEANING PROGRAMMES
After it starts, ROBÒ automatically calculates the
optimal cleaning route by choosing which path to
take to cover all the accessible rooms.
ROBÒ travels through and cleans all rooms of the
home without leaving any uncovered patches,
guaranteeing thorough cleaning. By default it
starts with the SMART program.
In this programme, the robot cleans along
parallel lines.
In this programme, an area measuring roughly 2 m
2
is
cleaned rapidly in a circular direction, starting from a
centre of rotation chosen by the user.
Place ROBÒ manually in the centre of the spot to be
cleaned and activate the cleaning cycle by pressing
the
button for 6 seconds.
Once cleaning terminates, ROBÒ will reposition itself
in the centre of the cleaned area.
A
Smart
A
SMART PROGRAMME
SPOT PROGRAMME
In this programme, ROBÒ cleans the perimeter
of the walls of the room where it is located.
FOLLOW THE WALL PROGRAMME
Once cleaning terminates, ROBÒ returns to its
charging base, empties the dust container (if the
self-cleaning base is mounted) and charges the
battery automatically.
These programmes can also be activated via the
TUBÒ ROBÒ app and from ATR806 remote control
(optional)
Follow the wall
200
cm
OPERATION WITH THE PUSH-BUTTON PANEL
ROBÒ has three control modes:
ROBÒ push-button panel - TUBÒ ROBÒ app - ATR806 Remote control (optional)
ROBÒ CONTROL MODES
The push-button panel allows for using the following
control modes:
FUNCTION
BUTTONS ON ROBÒ
SWITCH-ON
ROBÒ switches on (check the battery charge
as explained on page 7)
press the button for 6 seconds
CLEANING CYCLE START
the SMART cleaning programme activates
(starts with the self-cleaning charging base)
press the button briefly
PAUSE / RESTART
puts the cleaning programme in pause/restart
mode
press the button briefly
RETURN TO CHARGING BASE
the robot returns to the charging base wherever
it is located
press the button briefly
DUST CONTAINER AUTOMATIC CLEANING
(only with self-cleaning charging base)
with ROBÒ mounted on the self-cleaning
base, press the button twice rapidly.
The central vacuum unit activates and the
ROBÒ dust container empties
SPOT CLEANING PROGRAMME
press the button for 3 seconds
REPEAT CLEANING CYCLE
press the button twice
SELF-CLEANING FUNCTION DISABLING /
ENABLING
the automatic self-cleaning function is disabled
/ enabled again
simultaneously press and hold for 3
seconds the button and the front
collision guard
SWITCH-OFF
ROBÒ switches off with any set cleaning
programme
press the button for 6 seconds
Smart
Spot
Follow the wall
