Instruction manual for use and maintenance - EN
Rev.: 0
–
aggiornato al 06/11/2020
| Con riserva di modifiche tecniche e salvo errori |
Pag.
8
di
39
3.2.
Features and versions
The mobile air cleaner is available in five versions:
-
OTS 1t
with cartridge filter - mechanical filtration
higher filter efficiency:
≥
99%
|
M
(sec. DIN 660335-2-69)
-
OTS 1t / inverter
with cartridge filter - mechanical filtration
higher filter efficiency:
≥
99%
|
M
(sec. DIN 660335-2-69)
air flow regulation by inverter
-
OTS 2t
with cartridge filter - mechanical filtration
higher filter efficiency:
≥
99%
|
M
(sec. DIN 660335-2-69)
-
OTS 2t / inverter
with cartridge filter - mechanical filtration
higher filter efficiency:
≥
99%
|
M
(sec. DIN 660335-2-69)
air flow regulation by inverter
-
OTS 2t / triac
(only 110V)
with cartridge filter - mechanical filtration
higher filter efficiency:
≥
99%
|
M
(sec. DIN 660335-2-69)
air flow regulation by triac
3.3.
Proper use
The unit has been conceived to extract and filter the welding fumes generated by industrial welding
processes, directly at source. In principle, the unit can be used in all work processes with emission of
welding fumes. However, it is necessary to prevent the unit from sucking in "spark showers" from
grinding or similar.
Pay attention to the dimensions and further data that are mentioned in the technical data sheet.
Carefully read
and comply with the instructions in chapter “9.1 Technical data of the
unit
”.
The use in accordance with the instructions of this manual also means following the specific
instructions:
-
for safety;
-
for use and setting;
-
for maintenance and repair,
mentioned in this user manual.
Any further or different use is to be considered as non-compliant.
The user of the unit is the sole responsible for any damage resulting from such non-
compliant use.
This also applies to arbitrary interventions and unauthorized modifications on the unit.
INFO
