Instruction manual for use and maintenance - EN
Rev.: 0
–
aggiornato al 06/11/2020
| Con riserva di modifiche tecniche e salvo errori |
Pag.
21
di
39
Remember that alarm reset is linked with the maintenance, cleaning or replacement of the filters.
The Manufacturer cannot be held liable for any breakdowns, malfunctions or shorter lifetime if alarms
reset and maintenance are not carried out according to the present provisions.
Aerservice Equipments provides the unit with all alarm functions activated. Any deactivation of alarm is
not attributable to the Manufacturer but to interventions carried out by the user or, eventually, by the
dealer.
Aerservice Equipments recommends not to turn off any alarm, in order to maintain a high level of control
over the unit and the maintenance of filters and to safeguard the performance of the unit and the health
of the user.
Inside the USER MENU there is also the FIL.BUZ.ALERT. function, about the alarms with buzzer.
It is possible to set three levels of this functions, as follows:
•
NO: the buzzer acoustic signal is not active.
•
EXHAUST: the buzzer acoustic signal is activated by the filter pressure differential gauge.
•
DIRTY/EXHAUST: the buzzer acoustic signal is activated both by the filter pressure differential
gauge and by the internal hour meter set by the factory.
It is strictly forbidden to reset the alarms without having performed the necessary
maintenance!
Aerservice Equipments is exonerated from any responsibility if these instructions are not
respected.
WARNING
