Instruction manual for use and maintenance - EN
Rev.: 0
–
aggiornato al 06/11/2020
| Con riserva di modifiche tecniche e salvo errori |
Pag.
29
di
39
9.6.
EC declaration of conformity
THE MANUFACTURER
Aerservice Equipments Srl
Company
Viale dell’Industria, 24
35020
Legnaro
Address
Postal code
City
Padova
Italy
Province
Country
DECLARES THAT THE PRODUCT
Mobile filter unit for the extraction of welding fumes
Description
Serial number
Year of manufacture
OTS
Commercial name
Extraction and filtration of welding fumes in non-heavy processes in absence of oil and grease
Intended use
IS IN COMPLIANCE WITH THE FOLLOWING DIRECTIVES
Directive 2006/42/EC
of the European Parliament and Council, May 17th 2016, on machinery amending directive 95/16/EC.
Directive 2014/30/EU
of the European Parliament and Council, February 26th 2014, on the approximation of the laws of the member States relating to
electromagnetic compatibility.
Directive 2014/35/EU
of the European Parliament and Council, February 26th 2014, on the approximation of the laws of the member States relating to
electrical equipment destined to be used within certain voltage limits.
Directive 2011/65/EU
of the European Parliament and Council, June 8th 2011, on the restriction of the utilization of certain substances in the electric and
electronic devices.
The following harmonized standards have been applied
UNI EN ISO 12100:2010:
Safety of machinery - General principles for design - Risk assessment and risk reduction.
UNI EN ISO 13849-1:2016:
Safety of machinery - Safety-related parts of control units - Part 1: General principles for design.
UNI EN ISO 13849-2:2013:
Safety of machinery - Safety-related parts of control units - Part 2: Validation.
UNI EN ISO 13857:2020:
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs.
CEI EN 60204-1:2018:
Safety of machinery - Electrical equipment of units - Part 1: General requirements.
The complete list of applied standards, guidelines and specifications are available at the Manufacturer.
Additional information: The declaration of conformity decays in case of non-compliant use and in the event of
configuration changes that have not been previously approved by the Manufacturer in writing.
DECLARES THAT THE TECHNICAL FILE
Has been compiled, and is kept and available at the registered office of the Company.
Luogo e data del documento
L’Azienda
produttrice
Legnaro,
Marco Gallerino
