Instruction manual for use and maintenance - EN
Rev.: 0
–
aggiornato al 06/11/2020
| Con riserva di modifiche tecniche e salvo errori |
Pag.
3
di
39
1.
GENERAL INFORMATION
1.1.
Introduction
This user manual provides important information for the correct and safe operation of Aerservice
Equipments’ mobile filter unit OTS suitable for extraction of welding fumes
.
The instructions contained in this manual help to avoid dangers, to reduce repair costs and machine
downtime and to increase the reliability and lifetime of the unit.
The user manual shall always be at hand; all information and warnings contained therein shall be read,
observed and followed by all people who work by the unit and are involved in tasks, such as:
-
transport and assembly;
-
normal use of the unit during work;
-
maintenance (replacement of filters, troubleshooting);
-
disposal of the unit and its components.
1.2.
Information on copyright and related rights
All information included in this instruction manual must be treated confidentially and may be made
available and accessible only to authorized people.
It may be disclosed to third parties only with the prior written consent of Aerservice Equipments.
All documentation is protected under the copyright law.
Any distribution or reproduction, in total or partial, of this document, as well as its use or transmission
without prior and explicit authorization by Aerservice Equipments, is prohibited.
Any violation of this prohibition is punishable by law and involves penalties.
All rights relating to industrial property rights are reserved to Aerservice Equipments.
1.3.
Instructions for the user
These Instructions are an integral part of the unit OTS.
The user must ensure that all personnel in charge of the unit have adequate knowledge of these
Instructions.
The user is required to complete the Manual with instructions based on national regulations for injury
prevention and environmental protection, including information on surveillance and notification
obligations, in order to consider specific requirements, such as organization of work, working methods
and personnel involved.
In addition to the instructions and regulations for the prevention of accidents, in force in the country
and in the place where the unit is used, it is necessary to comply with the common technical principles
for a safe and correct use of the unit.
The user shall not make any modifications to the unit, nor add parts or adjust it without permission by
Aerservice Equipments because this could jeopardize its safety!
The spare parts used shall correspond to the technical specs established by Aerservice Equipments.
Always use original spare parts to ensure correspondence of the unit to the technical specifications.
Allow only trained and expert personnel for the operation, maintenance, repair and transport of the
unit.
Establish individual responsibilities for operation, configuration, maintenance and repair.
