90
1. Gather the 4 wing mounting bolts and 4 #8 large
rubber backed washers.
Always check for good fit of the wing attachment
bolts. We recommend using cotter pins through
the aluminum anti-rotation dowels for a second
method of security.
PRE-FLIGHT PREPARATION
2.
Slide the wing tube in the fuse wing tube
sleeve. Slide the wings on the wing tube and
plug in the aileron servo connectors. Slide the
rubber backed washers on the wing mounting
bolts and insert bolts through the fuse side and
into the wing root blind nuts. Tighten snugly
but do not over tighten and crack the fuse or
wing root wood.
3.
Gather the 4 stab mounting bolts and 4 #6
small rubber backed washers.
4.
Slide the stab tubes in the fuse stab tube
sleeves. Slide the stabs on the stab tube and
plug in the elevator servo connectors. Slide
the rubber backed washers on the stab mount-
ing bolts and insert bolts through the stab
mounting tabs and into the fuse blind nuts.
Tighten snugly but do not over tighten and
crack the stab mounting tabs or the fuse sides.
