26
6.
Tighten the second loop through the brass
swage tube and crimp the brass tube with a
crimping tool or pliers. Cut off excess cable
as shown. A drop of thin CA may be applied
to the swage tube to help secure the cable.
7.
Repeat above steps for the other side rudder
cable.
8. Attach a metal threaded RC link to each
threaded coupler. Attach the RC links to the
rudder servo arm and then attach the servo arm
to the aft rudder servo as shown.
Note:
You will want to use a 3” to 3 1/2” servo arm
9. Build the rudder servo arm couplers as shown.
We recommend 4-40 Easy Links and 4-40 wire
rods for ease of assembly and adjustment.
Note:
Rudder coupler hardware is not supplied
10.
If 4-40 easy links are used be sure to use metal
clips on the bottom of the easy links.
