37
5.
Slide the wheel pant slot over the flat sides of
the axle bolt and align the wheel pant with the
wheel pant mounting holes.
6.
Install and tighten the wheel pant mounting
bolts to hold the wheel pant in place. Do not
use lock-tite at this time.
7.
Now tighten the axle nut against the landing
gear strut with a small wrench while using the
wheel pant slot to hold the flat sides of the
axle bolt in alignment. Tighten the lock nut
enough so that the axle bolt will not rotate dur-
ing final tightening.
8.
Remove the wheel pant and use two wrenches
to permanently tighten the axle to the gear
strut.
