Aerotech Ndrive ML Series, Hardware Manual

Page: 26 / 92

26 Chapter 2 www.aerotech.com
2.2. Power Connections
The Ndrive ML has two DC input connectors; one for control power and a second for motor power. For a
complete list of electrical specifications, refer to
Section 1.2.
N O T E : The machine integrator, OEM or end user is responsible for meeting the final protective ground-
ing requirements of the system.
W A R N I N G : All service and maintenance must be performed by qualified personnel.
D A N G E R : Hazardous Voltages are present on Ndrive ML systems.
D A N G E R : Ndrive ML and PS-ML systems must be installed inside a rack or enclosure to
restrict access while energized.
D A N G E R : To minimize the possibility of bodily injury or death, disconnect all electrical
power prior to performing any maintenance or making adjustments to the equipment.
Ndrive ML Installation and Configuration