2.3.6. Brake Outputs
The drive has a dedicated brake control circuit. Configure the brake with the BrakeSetup parameter
for automatic control (typical). You can also use software commands to directly control the brake
output.
Table 2-21:
Brake Output Pins on the Feedback Connector
Pin #
Description
In/Out/Bi
13
Brake Output -
Output
25
Brake
Output
Table 2-22:
Brake Control Specifications
Specification
Value
Maximum Voltage
24 VDC
Maximum Current
1 A
A varistor must be connected across the brake to minimize voltage transients.
Figure 2-23:
Brake Connected to the 25-Pin Feedback Connector (Typical)
XL2e Hardware Manual
2.3.6. Brake Outputs
www.aerotech.com
47
