2.3.1.1. Square Wave Encoder (Primary)
The drive accepts RS-422 square wave encoder signals. The drive will generate a feedback fault if it
detects an invalid signal state caused by an open or shorted signal connection. Use twisted-pair
wiring for the highest performance and noise immunity.
Table 2-15:
Square Wave Encoder Specifications
Specification
Value
Encoder Frequency
10 MHz maximum (25 ns minimum edge separation)
x4 Quadrature Decoding
40 million counts/sec
Figure 2-12:
Square Wave Encoder Schematic (Feedback Connector)
XL2e Hardware Manual
2.3.1.1. Square Wave Encoder (Primary)
www.aerotech.com
37
