Table 1-3:
Electrical Specifications (continued)
XC6e-10-480
XC6e-20-480
XC6e-30-480
Motor Supply
Input Voltage
7-480 VAC
Input Frequency
50-60 Hz
Inrush Current
Not internally limited.
Input Current
5 A
10 A
15 A
Control Supply
Input Voltage
100-240 VAC
Input Frequency
50-60 Hz
Inrush Current
120 A
pk
@ 240 V
Input Power
20 W
Output Voltage
(1)
680 VDC
Peak Output Current (1 second)
(2)
10 A
20 A
30 A
Continuous Output Current
(2)
5 A
10 A
15 A
Power Amplifier Bandwidth
2500 Hz maximum (software selectable)
PWM Switching Frequency
20 kHz or 10 kHz (software selectable)
Minimum Load Inductance
0.5 mH
User Power Supply Output
5 VDC (@ 500 mA)
Modes of Operation
Brushless
Protective Features
Output short circuit; Peak over current; DC bus over voltage;
RMS over current; Over temperature; Control power supply
under voltage; Power stage bias supply under voltage
Isolation
Optical and transformer isolation between control and power
stages.
(1) AC input voltage and load dependent.
(2) Current is measured as the peak amplitude in any motor phase.
XC6e Hardware Manual
1.1. Electrical Specifications
www.aerotech.com
19
Summary of Contents for Automation1 XC6e Series
Page 1: ...Revision 1 00 Automation1 XC6e High Powered PWM Digital Drive HARDWARE MANUAL...
Page 23: ...Figure 1 4 Dimensions EB1 XC6e Hardware Manual 1 2 2 Dimensions www aerotech com 23...
Page 62: ...Figure 2 27 PSO Interface 2 5 Auxiliary I O Connector XC6e Hardware Manual 62 www aerotech com...
Page 110: ...Index XC6e Hardware Manual This page intentionally left blank 110 www aerotech com...
